Home › Sports lighting › PS-PADEL
PS-PADEL

PS-PADEL LED padel court floodlight

Quality components: Sosen driver

PS-PADEL is a padel court floodlight for outdoor courts and indoor halls. A 100 x 60 degree asymmetric optic is designed for padel, and the fitting can be mounted horizontally at 0 degrees so the beam is aimed onto the court with no upward light. The datasheet states ULR 0% and no back light. A typical design uses four fittings per court.

  • 150 or 250 W, 28,500 or 47,500 lm
  • 190 lm/W at CRI >70
  • 100 x 60 degree asymmetric optic, ULR 0%
  • IP66 and IK10, ADC12 aluminium housing
  • Sosen driver, 100 to 277 V, 6 kV surge
  • Optional 1-10V, PWM, Triac or DALI-2 dimming
190 lm/W
Efficacy
IP66
Ingress
IK10
Ball impact
7 Years
Warranty

See how it compares with other published padel fittings on best padel court lights. For lux levels and planning, read the padel court lighting guide, or book a survey on the padel courts page.

Request a quoteDownload spec sheet
Features

Padel optic, 0 degree aim, four fittings per court

The 100 x 60 degree asymmetric optic is designed for padel and can be mounted horizontally at 0 degrees. The datasheet states ULR 0% and no back light. It describes the optic as low UGR, but it does not publish a UGR number. We have not invented one.

A typical design uses four fittings per court. The datasheet class targets are 4 x 150 W for 300 lx and 0.6 uniformity, and 4 x 250 W for 500 lx and 0.7 uniformity. Calculated design values in the same datasheet, for four fittings mounted at 6 m and aimed at 0 degrees horizontally, are:

  • Class II, 4 x 150 W: Eav 323 lx, Emin/Eav 0.76, Emin/Emax 0.58, ULR 0%, GR Max 27
  • Class I, 4 x 250 W: Eav 524 lx, Emin/Eav 0.74, Emin/Emax 0.57, ULR 0%, GR Max 27

Those figures are the datasheet's calculated results, not Polaris field measurements. GR Max 27 is a glare rating from that calculation, not a published UGR number.

Typical four-fitting padel court layout with PS-PADEL floodlights, a layout render
Typical four-fitting layout with PS-PADEL floodlights, mounted horizontally at 0 degrees. This is a layout render, not a photograph of an installed court.
Specification

Key specification

Input voltage100 to 277 V AC, 50/60 Hz
Power150 / 250 W
Luminous flux28,500 / 47,500 lm
Efficacy190 lm/W (published at CRI >70)
CRI / MacAdamCRI >70 / MacAdam ≤5
Colour temperature3000K, 4000K, 5000K, 5700K or 6500K
Optic100 x 60 degree asymmetric, ULR 0%, no back light
IP / IKIP66 / IK10
Electrical classClass I
Power factor>0.95
Surge6 kV DM and CM
THD<8% (220 V AC / 50 Hz, full load, 25°C)
LifetimeL70B10 >102,000 h (TM-21 based on LM-80)
Ambient temperature-40°C to +45°C
DriverSosen
Controls1-10V, PWM, Triac dimming (optional); DALI-2 (optional)
Cable3 × 1.0 mm², 0.8 m
HousingADC12 aluminium, colour RAL 7016, PC optic
MountingBracket; mounting bracket and pole mounting bracket accessories
Warranty7 years on the fitting
StandardsDesigned to IEC 60598-1, IEC 60598-2-1, EN IEC 55015, EN IEC 61000-3-2, EN IEC 61000-3-3, EN 61547, EN IEC 62031, EN 62493 and IEC TR 62778
Use

Where it is used

  • Outdoor padel courts
  • Indoor padel halls
  • Clubs designing to 300 lx or 500 lx class targets
  • Four-fitting, 0 degree horizontal layouts at 6 m

For a continuous indoor linear run, see PS-PADEL-LINEAR. For a general sports flood that can take a padel optic, see PS-POWER.

Technical specifications

Models, watts, lumens and dimensions

ProductPowerLumensEfficacyDimensions (L × W × H)Net weightGross weightCarton
PS-PADEL-150150 W28,500 lm190 lm/W533 × 184 × 100 mm3.15 kg3.86 kg595 × 250 × 165 mm
PS-PADEL-250250 W47,500 lm190 lm/W711 × 184 × 100 mm3.70 kg4.45 kg775 × 250 × 165 mm

Lumens are 150 W × 190 lm/W = 28,500 lm and 250 W × 190 lm/W = 47,500 lm. There is no 200 W model in the product data.

Applications

Outdoor and indoor padel courts

PS-PADEL is the Polaris floodlight specified for padel, with a 100 x 60 degree asymmetric optic, IP66 and a 7-year warranty on the fitting. We survey the court, plan the fittings and can supply and install. Ask for a free lighting survey and a lux plot for the level of play at your site.

Downloads

Spec sheet

PS-PADEL spec sheet v1 (PDF)Download spec sheet
Free survey

Free lighting survey and lighting design plan

Tell us about your site. We survey it, plan the right fittings and light levels for each area, and send you a proposal with no obligation.

  • Site survey of mounting heights, layout and existing fittings
  • Lighting design plan to the light levels your site needs
  • Supply and installation, with a warranty of at least 5 years on every Polaris product

Want a first idea of the saving? Try our LED savings calculator.

7 Yrs

7-year warranty on PS-PADEL

PS-PADEL comes with a 7-year warranty on the fitting and UK-based support. PS-PADEL-LINEAR also has a 7-year warranty. Every other Polaris product has a warranty of at least 5 years.

Talk to our team
FAQ

PS-PADEL questions

What is PS-PADEL used for?

PS-PADEL is an LED floodlight for outdoor and indoor padel courts. A 100 x 60 degree asymmetric optic is designed for padel, and the fitting can be mounted horizontally at 0 degrees.

What wattages and efficacy does it have?

It is available at 150 W (28,500 lm) and 250 W (47,500 lm), at 190 lm/W. Efficacy is published at CRI greater than 70.

How many fittings does a court need?

A typical design uses four fittings per court. Datasheet class targets are 4 x 150 W for 300 lx and 0.6 uniformity, and 4 x 250 W for 500 lx and 0.7 uniformity. Calculated design values in the same datasheet, for four fittings at 6 m aimed at 0 degrees horizontally, are Eav 323 lx (Class II, 150 W) and Eav 524 lx (Class I, 250 W). Those figures are the datasheet's calculated results, not Polaris field measurements.

How is it mounted?

PS-PADEL is bracket mounted and can be aimed horizontally at 0 degrees. A mounting bracket and a pole mounting bracket are available as accessories. The supply cable is 3 × 1.0 mm², 0.8 m.

What IP and IK ratings does it have?

It is rated IP66 and IK10. The housing is ADC12 aluminium, colour RAL 7016, with a PC optic. Operating temperature is -40°C to +45°C.

Which driver does PS-PADEL use?

PS-PADEL is supplied with a Sosen driver, a quality driver with a power factor above 0.95 and THD below 8% at 220 V AC / 50 Hz, full load, 25°C. Optional dimming is 1-10V, PWM or Triac, and DALI-2 is also optional.

What warranty does PS-PADEL have?

PS-PADEL carries a 7-year warranty on the fitting. PS-PADEL-LINEAR also has a 7-year warranty. Every other Polaris product has a warranty of at least 5 years.