Home › Insights › Food manufacturing lighting
Free checklist (PDF)

LED lighting for UK food manufacturing

Food manufacturing halls need light that is easy to clean, without glass over open product, and bright enough for the task. This page sets out the hygiene points already published for PS-FOOD, points you to the workplace lighting standard for task levels, and links the cold store lighting guide for chill and freezer rooms. The free PDF is a short survey checklist. It does not publish Polaris prices, and it does not invent lux figures.

Cover of the Polaris Light food manufacturing lighting checklist
  • Hygiene design: smooth housing, no glass, IP69K
  • Task lighting via BS EN 12464-1, without invented figures
  • PS-FOOD, and fittings for washdown and ancillary areas
  • Where the cold store guide applies instead

Get the free checklist

PS-FOOD round high bay

  • IP69K and IK10, no glass, no exposed screws
  • 100 to 200 W at 160 lm/W
  • 5-year warranty on the fitting
See PS-FOOD
Polaris PS-FOOD round high bay for food manufacturing

What is in the checklist

  1. What food manufacturing lighting has to do besides reaching a lux figure
  2. Hygiene design points already published for PS-FOOD
  3. How to use BS EN 12464-1 for task lighting, without copying unpublished figures
  4. When to use the cold store guide instead of this page
  5. A site survey list and sources

Hygiene first, then the light level

In an open food hall the fitting itself is part of the hygiene design. Dust sitting on a high bay, a glass cover over an open line, or exposed screws that are hard to clean, can matter as much as the lux on the work surface. The lighting design still has to meet the task. Those two jobs should be specified together, not one after the other.

Task illuminance for indoor work places is set in BS EN 12464-1:2021. Our UK lux levels guide already publishes selected rows from that standard, including packing, rack storage, assembly and offices. We have not added food-preparation, bakery or butchery lux figures on this page, because those rows are not in the table we have already published and we have not reproduced them from the standard here. For a food hall, the lighting design should take the figure from the standard for the actual task, then confirm it with a lux plot.

PS-FOOD, designed for a food hall

PS-FOOD is a round LED high bay for food manufacturing and similar high-ceiling halls. The round shape helps stop dust and dirt collecting on top of the fitting. The supporting technical sheet describes a smooth, easy-clean surface, a polycarbonate cover instead of glass, and no exposed screws. It is rated IP69K and IK10, in a die-cast housing 300 x 180 mm, powder coated, with a polycarbonate lens, in white or silvery grey.

Outputs are 100 W (16,000 lm), 120 W (19,200 lm), 150 W (24,000 lm) and 200 W (32,000 lm) at 160 lm/W. Beam angles are 30, 60 and 120 degrees. The driver is Meanwell. Optional motion and daylight sensors are available, and controls listed on the product page include 1-10 V and DALI. The operating temperature is -30 C to +50 C. Every Polaris product carries a warranty of at least 5 years on the fitting.

Washdown areas and ancillary rooms

Open production is not the only space on a food site. Washdown areas, and halls cleaned with high-pressure jets, may need a sealed batten rather than a high bay. PS-CORROSION is an IP69K tubular batten with a seamless PMMA tube, 304 stainless steel end caps and a Tridonic driver, in 20, 40 and 60 W at 150 lm/W, IK10, with a 5-year warranty. For dry packing, stores and staff areas, PS-BATTEN and the panel range on our warehouse lighting and industrial lighting pages may be the better fit. Those choices belong in the same survey, so the site is not specified as a single product.

Chill and freezer rooms are a different page

This page is for food manufacturing halls. It is not a second cold store guide. If the room is a chiller, freezer or temperature-controlled store, use the cold store lighting guide, which covers low-temperature operation, and then come back to this page for the production hall. The two documents are meant to sit together on a mixed site, not to compete.

Frequently asked questions

What makes a high bay suitable for food manufacturing?

PS-FOOD is specified with a round, easy-clean shape so dust is less likely to collect on top, a polycarbonate cover instead of glass, no exposed screws, and an IP69K rating. Those points come from the PS-FOOD product page and its technical sheet. The light level still has to be designed for the task.

How many lux does a food factory need?

The figure comes from BS EN 12464-1:2021 for the actual task, not from a generic "food factory" number. We have not published food-preparation lux figures on this page. Our UK lux levels guide already lists selected tasks from the same standard, such as packing and assembly. A survey and a lux plot settle the design for your hall.

Is PS-FOOD the only fitting for a food site?

No. PS-FOOD is the high bay for production halls. Washdown areas may need PS-CORROSION. Chill and freezer rooms are covered by the cold store lighting guide. Packing, stores and offices may use battens or panels. The survey should list each area.

Does the 5-year warranty cover every part?

Every Polaris product carries a warranty of at least 5 years on the fitting. That warranty does not apply to emergency packs or batteries.

How do I get the food manufacturing lighting checklist?

Enter your name, organisation and email in the form on this page. You can download the free PDF straight away. You can also ask for a free survey if you are planning a project.

Free lighting survey

Every Polaris product carries a warranty of at least 5 years on the fitting. Tell us about your halls and we will send you a lux plot and proposal with no obligation.

Request my free survey