What is in the checklist
- Which lighting standard applies to your site
- Indoor car park light levels we have already published from BS EN 12464-1:2021
- Spill light and neighbours, in outline
- Choosing a column, post or mast fitting
- Sensors, dimming and covered-park emergency lighting
- A site survey list and sources
Which standard applies
Not every car park is designed to the same document. The right choice depends on whether the area is indoors, an open public or private outdoor park, or a workplace yard with a defined task.
- Covered and indoor car parks are workplace interiors. Light levels for traffic lanes, ramps and pedestrian paths are set in BS EN 12464-1:2021, Light and lighting. Lighting of work places. Indoor work places.
- Outdoor work places, including many yards and external car parks, are covered by BS EN 12464-2, Light and lighting. Lighting of work places. Outdoor work places. Our UK lux levels guide already names this standard for those areas. We have not published figures from BS EN 12464-2.
- Outdoor public lighting, including many access roads and some open public car parks, is designed to BS 5489-1. We have not reproduced figures from that standard on this page, because we have not verified them from the published text.
- Service yards and loading bays should be briefed from the actual task, not from a generic "car park" number.
Our UK lux levels guide already publishes the indoor car park row from BS EN 12464-1:2021. We repeat it below, unchanged. If your site is an open outdoor park, ask for a design to the standard that actually applies, rather than copying an indoor figure.
Indoor car park light levels
All values below are maintained illuminance from BS EN 12464-1:2021, as already published in our lux guide. UGR is the glare rating limit. Ra is the colour rendering index.
| Area or task | Em required (lux) | Em modified (lux) | UGR limit | Ra |
|---|---|---|---|---|
| Indoor car park: traffic lanes, ramps and pedestrian paths | 75 | 100 | 25 | 40 |
Required and modified maintained illuminance are both given in the standard. The right target for a project is settled in the lighting design, not by picking a figure from a product page. We have not added outdoor lux figures, camera lux figures, or uniformity numbers that we have not checked in the relevant standard.
Spill light and neighbours
Asymmetric optics put more light on the ground and less into the sky or neighbouring windows. That is why PS-FLOOD is offered with asymmetric distributions, and why a visor is listed as an option. PS-STREET uses Type II, III, IV and V road optics so the distribution can follow the road or bay layout rather than a simple circular flood.
For obtrusive light, designers in the UK commonly refer to Institution of Lighting Professionals (ILP) guidance. We have not copied numeric limits from that guidance here. A lighting design for a site close to houses should include a light-spill drawing, not only a lux plot on the tarmac. Polaris produces both, and can support a planning application where one is needed.
Which Polaris fitting to use
Every Polaris product carries a warranty of at least 5 years on the fitting. We do not publish prices on this page. The right wattage and optic come from the design, not from a catalogue default.
- PS-FLOOD is the column, lamp post, wall and gantry floodlight for car parks, service yards, loading bays and site perimeters. Six outputs from 100 to 400 W, 160 to 180 lm/W, IP66 and IK08 (IK10 with the metal mesh). Asymmetric P45 optics are standard, with nine optics in all (25, 55, 90 and 120 degrees, P30, and Type II, III and IV). It dims via 1-10 V and DALI. The most popular 150 W model gives 25,500 lumens; the 400 W model gives up to 68,000 lumens. Operating temperature is -40 C to +45 C, with 6 kV surge protection as standard.
- PS-STREET is a spigot-mounted street light for estate roads, retail car parks, site perimeters, footpaths and cycle routes. Outputs from 24 to 200 W at 170 lm/W, up to 34,000 lumens at 200 W, IP66 and IK08, with Type II, III, IV and V optics. Controls include DALI, 0/1-10 V, a timer and a photocell option.
- PS-POLE is a post-top light for paths, plazas, parks, campuses and car parks where the column is part of the streetscape. Outputs from 30 to 90 W, 5,100 to 13,500 lumens, IP66 and IK08, with symmetric or asymmetric optics.
- PS-MAST is the modular high-mast floodlight for large car parks, freight yards and similar open areas lit from tall masts. Modules build 500, 750, 1,000 or 1,500 W fittings at 170 lm/W, from 85,000 to 255,000 lumens, with IP66 and IK08 and a remote driver box.
Optional sensors and dimming help where a park or yard is quiet for long periods. We have not stated energy-saving percentages, because they depend on the existing installation and the occupancy profile. For covered parks, emergency lighting is a separate design, covered on our warehouse emergency lighting page rather than repeated here.
This page and our product pages
This page is the site-owner guide: standards, spill, a checklist and a PDF. The product pages list the fittings in full, including options and specification tables. You may also want the UK lux levels guide, our supply and installation page, or the projects overview, which includes an outdoor, street and car park category.
Frequently asked questions
How many lux does a UK car park need?
For an indoor or covered car park, BS EN 12464-1:2021 gives a required maintained illuminance of 75 lux and a modified figure of 100 lux on traffic lanes, ramps and pedestrian paths, with a UGR limit of 25 and Ra of 40. Those figures are already published in our UK lux levels guide. Outdoor work places, including many yards and external car parks, are covered by BS EN 12464-2, which our lux guide already names, though we have not published figures from it. Many access roads and some open public parks are designed to BS 5489-1. We have not quoted figures from that document here.
What is the difference between PS-FLOOD and PS-STREET?
PS-FLOOD is a floodlight with a graduated aiming bracket, made for columns, walls and gantries, with asymmetric and flood optics. PS-STREET is a spigot-mounted street lantern with Type II to Type V road optics, made for roads, estate roads and parks where a street-light distribution is the better match. A design will sometimes use both on one site.
Do car park lights need planning permission?
New or relocated columns, or a change in brightness and spill, can need planning consent. That is a decision for the local planning authority. If you need a planning drawing, we produce the lux plot and the light-spill drawing, and can support the application. We have not stated numeric spill limits on this page.
Can the lights dim when the park is empty?
Yes. PS-FLOOD dims via 1-10 V and DALI. PS-STREET offers DALI, 0/1-10 V, a timer and a photocell option. Sensors are optional. The right control method is part of the design.
How do I get the car park and yard lighting checklist?
Enter your name, organisation and email in the form on this page. You can download the free PDF straight away. You can also ask for a free survey if you are planning a project.

